Siemens Distributed I/O Simatic ET200S 6ES7134-4FB50-0AB0

product description

• 
• The ET 200S distributed I/O system is a discrete, modular, highly flexible DP slave for connecting process signals to a central controller or fieldbus. ET 200S supports the fieldbus types PROFIBUS DP and PROFINET IO. The ET 200S has a degree of protection of IP 20.

  .Application

  Any number of I/O modules can be connected to the right of an interface module in any combination and then transmit the data to a central controller. This allows you to focus the configuration on local requirements.

  Depending on the interface module, each ET 200S can contain up to 63 modules - such as power supply modules, I/O modules and motor starters.
  

  The possibility of integrating motor starters (switching and protecting any three-phase load up to 7.5 kW) ensures that the ET 200S can be quickly adapted to the requirements of any machine.

• Features

  Supports PROFIBUS and PROFINET fieldbuses

  Each interface module can be expanded to up to 63 modules or 2 m wide

  ET 200S has an integrated PROFIBUS DP communication port (with CPU314 function) and IM151-8 PN/DP CPU interface module (with 3 PROFINET interfaces)

  ET 200S can be expanded to 7.5 kW motor starters and 4.0 kW inverters

  With a variety of diagnostic functions, including wire break, short circuit and channel-level diagnostic functions

  Supports coexistence of fail-safe modules and standard modules in one ET 200S station

  Supports a variety of digital, analog and function modules

  Supports hot swapping during power-on, which is convenient for replacing modules during operation

  Standard DIN35 mounting rail
• 

• 
• 
  
  Interface module

  Connects ET 200M as a slave to PROFIBUS DP (via copper connector

  The IM153-2 Profibus DP interface module can be used to communicate with S7-400H, soft redundant system communication;

  With time stamp function and clock synchronization;

  Can expand up to 8 or 12 S7-300 modules;

  Protection level: IP20

  Fully support Profinet network function;

  Can connect 12 S7-300 I/O modules at the same time;

  Communication rate is 10/100 Mbps, full-duplex, adaptive;

  Integrated 2 RJ45 interfaces, can easily realize linear topology;

  Support hot plug and unplug with power on, and with module plug and unplug alarm prompt;

  Module power supply has "T" function, which does not affect the normal operation of subsequent modules;

  No MMC card is required to operate normally, but the MMC card slot is reserved on the module
•